SABIN Offers New Brochure
A new 20 page full-color brochure is being offered from Sabin Metal Corp. The brochure was produced to mark Sabin's recent expansion and global market penetration and describes services and capabilities for recovering precious metals including gold, silver, platinum, and rhodium.
For a copy of the brochure, please call 716-538-2194.
Tabbed Board Depaneler from FANCORT
Fancort Industries now offers a tabbed board depaneler that uses multiple knives to separate up to six tabs with a single stroke. The bench-top pneumatically-powered NTM-R employs hook-shaped knives with blade surfaces facing downward. Each knife is positioned at a corresponding tab on the PCB. As the foot pedal is activated, the blades are automatically centered before delivering a down stroke.
For more information, please call 973-575-0610.
REMTEC Adds Automated Production Line
Remtec, Inc., has added an automated, high volume line to produce large format metalized ceramic panels for the manufacture of substrates, chip carriers, and packages. The new line gives Remtec the capability to produce higher quality, large format substrates at faster production rates. The new line also complements Remtec's existing film processing equipment and improves its overall capability to meet diverse customer requirements.
For more information, please call 781-762-9191.
New Lead-Free Solder Alternative from EMERSON & CUMING
The newest addition to Emerson & Cuming’s line of lead-free solder alternative adhesives, CE 3104 is a one-component, thermosetting, electrically-conductive adhesive.
It cures completely at low temperatures or following a typical eutectic solder reflow cycle, or at even lower temperatures when required. CE 3104 has exceptional contact resistance stability when used with Sn, Sn/Pb or OSP-Copper metalizations. It can run on standard SMT lines with no new equipment required.
For more information, please call 1-800-832-4929.
DrillStar GS-800 Next Generation from GSI LUMONICS
GSI Lumonics, Inc., has announced its fourth-general laser drilling system for creating blind microvias in PCBs. The DrillStar GS-800 adopts the same hybrid-dual-laser design philosophy pioneered by the earlier GS-600, but offers improved drilling speeds and reduced operating costs.
For more information, please call 248-449-8989.
FAIRCHILD SEMICONDUCTOR Has a New Family of 500V MOSFETs (FRFET™)
Fairchild Semiconductor International has announced a new family of 500V, fast-recovery MOSFETs designed to provide significant performance enhancements over conventional MOSFETs. The new FRFET™ demonstrates over 50% in improvements in diode reverse recovery characteristics and increased turn-off dv/dt immunity.
For more information, please call 408-822-2279.
FUJIPOLY Introduces ZEBRA Connector
Fujipoly America Corp. has introduced Carbon ZEBRA® elastomeric connectors for use in electronic products. Carbon ZEBRA® elastomeric connectors provide design engineers with an economical high performance interconnect device for applications in the growing electronic devices market.
For more information, please call 908-298-3850, ext. 208.
Highly Accurate — Rapid Turnaround Encoders from TECAN
Tecan Components offers an expansive source of optical encoders for the supply of disks and similar components ñ including simple or complex designs for various volume requirements. Tecan employs various manufacturing techniques to produce the appropriate encoder for a given requirement and, typically, they are produced with an accuracy of ±10% the thickness of the metal used - 1.5mm to 0.01mm.
For more information, please call 877-998-3226.
ARI Offers Its Capabilities Brochure
ARI International Corp., a subsidiary of Asahi Rubber, Inc., is offering its new, colorful brochure that details the company's capabilities in the design, engineering and high-volume production of various molded rubber goods used throughout many industries worldwide. ARI has expertise particularly in silicone rubber color boots used as LED caps, silicone gel thermally-conductive rubber used for CPU heat dissipation in electronic assemblies, etc.
For more information, please call 847-934-4500.
New High Temperature Adhesive on Stencils from MICROSCREEN
MicroScreen has announced a new high temperature stencil adhesive for joining of foil to polyester mesh on Etch Guard stencils. The raw materials in this new adhesive are specifically designed to withstand newer cleaning chemistries and environments. The new adhesive, designated Type 6, is available on both chemically-etched and laser cut stencils.
For more information, please call 219-232-4637.
RTS-5500 Rinse Water System Offered by GPD Global
GPD Global offers the RTS-550 rinse water treatment system for deionized water requirements. The RTS-550 conserves water and energy and accommodates resin tanks of up to 3.6 cubic feet and features a 60-gallon reservoir with a 7.5 kW immersion heater. It also features a 5-micron inlet particulate filter, redox heavy metals filter, and water quality sampling valves.
For more information, please call 970-245-0408.
QMAX Supermill New from PREMIER MILL
The new Premier QMAX Supermill is unsurpassed by any other media mill and contains a new grinding configuration which is unlike those in other conventional disc or peg type media mills. The QMAX uses a specific orientation of grinding components to create a unique, multi-directional acceleration of grinding material. A highly aggressive and pulsating flow pattern of the product media is achieved.
For more information, please call 610-779-9500.
| Table of Contents | Previous Page | Next Page |
